Photos non contractuelles

MARK LEVINSON ML 502

Sublimé preampli home cinema, réel haut de gamme, une pièce rare !

-75% Le prix initial était : 30000,00€.Le prix actuel est : 7390,00€.

en stock

Occasion

Caractéristiques techniques

  • Garantie : 6 mois
  • Emballage d'origine
  • Couleur : Silver
Frequency Response 20Hz to 20kHz, +/– 0.1dB
Input Impedance 100KΩ
Height (with feet) 9.46 inches (240.4mm); (without feet) 8.70 inches (221.0mm)
Width 17.48 in (444.0mm)
Depth 17.4 in (442.4mm)
Net Weight 54.5 lbs (24.6kg); Shipping weight 71.0 lbs (32.5kg)
Communication and Control One RS-232 port, RJ-11 connector; One Ethernet port, RJ-45 connector; One Link port, RJ-45 connector; Four programmable trigger outputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve); One IR receiver, on front panel; One IR Input jack, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve), 12V
Analog Audio Inputs One unbalanced 8-channel input array, RCA connectors; Four unbalanced stereo pairs, RCA connectors; Two balanced stereo pairs, XLR connectors; Four microphone inputs, 3.5mm mini plug, accepts either stereo plug (tip/ring/sleeve) or mono plug (tip/sleeve)
Maximum Output Level 7.5V/15Vrms RCA/XLR
Signal-to-Noise Ratio 4dB (Reference level 30kHz LPF)
Total Harmonic Distortion (THD) 94dB (Reference level 1kHz, 30kHz LPF)
Power Requirements 120V~, 60Hz / 100/220/230V~, 50-60Hz; factory set for destination country
Digital/Analog Conversion 14-bit, oversampling to 216MHz
Digital Audio Inputs Six HDMI Type A, Version 1.1, 19-pin connectors; Six S/PDIF coaxial (RCA) and three S/PDIF optical (TOSlink) connectors; Coaxial and optical input connectors conform to IEC-958, S/PDIF standards; Two AES/EBU inputs, XLR connectors
Main Audio Outputs One balanced 7.4-channel array, XLR connectors; One unbalanced 7.4-channel array, RCA connectors / Additional Analog Audio Outputs Remote Zone One unbalanced stereo pair, RCA connectors / Additional Digital Audio Outputs Two HDMI Type A, Version 1.1, 19-pin connectors
Video Inputs Six HDMI Type A, Version 1.1, 19-pin connectors; Four component video – one BNC & three RCA connectors (Y, Pb, Pr); Three S-video connectors; Three composite video, RCA connectors
Main Video Inputs Two HDMI Type A, Version 1.1, 19-pin connectors Additional One component with three BNC connectors (Y, Pb, Pr); One composite monitor, RCA connector
Features Audio Resolution Capability Audio Resolution Capability / Dynamic Range 94dB (Reference level 1kHz, 30kHz LPF)